Serving the Valley
Kitchen Remodeling in Tempe, AZ That Gets Done Right the First Time
Bayside Home Builders handles the full job, from layout planning and permits to cabinets, counters, and final walkthrough, so you get a finished kitchen, not a half-done project.
kitchen remodeling project · TempeTempe Kitchens Were Not Built for the Way People Cook or Entertain Today
Most Tempe homes built before 1990 have kitchens that were designed as utility rooms, closed off from the rest of the house, with limited counter space and storage that does not match what homeowners actually need.
What you are living with
You work around a layout that made sense in a different era. Counter space runs out during meal prep. The kitchen feels cut off from wherever your family is. Cabinets that are 30 or 40 years old have hinges that stick, drawers that bind, and finishes that no longer clean up well. In Tempe's heat, materials that were already marginal degrade faster, and older tile grout near the sink stays stained no matter how often you clean it.
What you get instead
A full kitchen remodel addresses the layout first, then the materials. Moving or removing a wall between the kitchen and living area is one of the most common changes we make in older Tempe ranches. From there, cabinet layout, countertops, and appliance placement can be configured around how you actually use the space, not how someone in 1965 assumed you would.
Our Recent Work
Kitchen Remodeling Done Right
A kitchen remodel touches plumbing, electrical, structural walls, tile, cabinetry, and appliances, all at once. We manage every trade under one contract so nothing falls through the cracks between subcontractors.
Cabinet Layout and Installation
We design cabinet runs to match how your household actually cooks, not just what looks good in a showroom photo. Full-overlay, inset, or semi-custom boxes installed level and square, with soft-close hardware standard.
Countertop Fabrication and Setting
We template, source, and coordinate installation of quartz, granite, porcelain slab, or butcher block. Seam placement is reviewed with you before the fabricator cuts a single piece.
Plumbing Rough-In and Finish
Moving a sink, adding a pot-filler, or relocating a dishwasher requires permitted rough-in work. Our licensed plumbers pull the permit and do the work, so no unlicensed handoff puts your project at risk.
Electrical Updates and Panel Coordination
Modern kitchens need dedicated circuits for refrigerators, microwaves, dishwashers, and countertop outlets. We assess your existing panel load and add circuits where code requires it.
Tile Backsplash and Flooring
Subway, mosaic, large-format slab, or handmade tile, we set it straight, grout it cleanly, and seal it correctly the first time. Floor tile transitions to adjacent rooms are planned before demo begins.
Appliance and Fixture Coordination
We confirm appliance rough-in dimensions before walls close so your refrigerator panel depth, range hood duct size, and dishwasher drain location are correct when delivery day arrives.
Why Homeowners Choose Bayside Home Builders
We are a licensed, bonded, and insured family-owned design-build contractor, AZ ROC 353387. Here is what that means on your actual job site.
One Contract, One Point of Contact
Design-build means you sign one contract and talk to one team from first sketch to final walkthrough. You are not coordinating between a designer, a GC, and three subs who each blame each other when something is off.
Permitted Work, Every Time
We pull permits on every job that requires them. Unpermitted kitchen work can kill a home sale and void homeowners insurance. We do not skip permits to win bids.
Honest Scope Before You Sign
We walk the existing kitchen, check the subfloor, look in the attic if ductwork is involved, and tell you what we find before you are committed. Surprise change orders mid-project usually mean the contractor did not look hard enough at the start.
Family-Owned Accountability
Our name and license number are on every permit card posted in your kitchen. The people who sell you the job are the people responsible when it is done. There is no franchise or corporate layer absorbing complaints.
What our clients say
Today we finished my kitchen and bath remodel. I worked with Paul who was nothing short of excellent. Not only did he design the kitchen and bath but he cared enough to order and oversee everything down to the tiniest detail. He suggested patterns…
We had an amazing experience with a whole house remodel with Bayside. Yarden was there for us throughout the entire process through design, picking materials and the construction. I have to admit I was a little nervous because of friends that have…
How a Kitchen Remodel Works With Us
Four straightforward steps from your first call to the day you cook your first meal in the finished kitchen.
Step 1: On-Site Assessment and Scope
We visit the kitchen, measure the space, check plumbing locations, evaluate electrical capacity, and look for any conditions behind walls or under floors that would affect the budget. You get honest findings before any design work begins.
Step 2: Design and Material Selection
We produce a layout drawing with cabinet dimensions, appliance placements, and countertop seam locations. You select materials from vetted suppliers. Nothing goes on the permit application until you have approved the final plan in writing.
Step 3: Permitted Construction
We pull the required permits, sequence the trades, and keep you informed of the schedule. Demo, rough-in, inspections, cabinet installation, countertop templating, tile, and finish work follow a coordinated timeline so your kitchen is not torn apart longer than necessary.
Step 4: Final Walkthrough and Close-Out
Before we consider the job done, we walk every detail with you, adjust anything that does not meet the agreed scope, and hand over permit close-out documents. You keep copies of the permit card and inspection record for your home file.
What Kitchen Remodeling Costs
Tempe kitchens range from a basic refresh to a full gut-and-rebuild, and where your project lands depends on a handful of concrete decisions you make early in the process.
Minor refresh
Cabinet refacing, countertops, backsplash, hardware, and lighting.
Mid-range remodel
New cabinets, quality countertops, appliances, and tile.
High-end remodel
Custom cabinets, premium appliances, and structural changes.
Tempe sits under City of Tempe Building Safety permitting jurisdiction, which requires a permit for any work involving electrical, plumbing, or structural changes, and review timelines there typically add two to four weeks before a tool hits your kitchen. A large share of Tempe homes were built between the 1960s and 1990s, which means older cabinet boxes, galvanized plumbing, and aluminum wiring show up regularly once walls open, and each discovery affects scope and cost. Cabinet lead times from the manufacturers we use run six to eight weeks, so locking in your selections early is the single biggest thing you can do to keep the project on schedule.
Kitchen Remodeling in Tempe, AZ
Tempe sits in the middle of the Valley, and we serve homeowners here regularly, from older ranch homes near ASU to newer builds closer to the 202. The work is the same as anywhere in Maricopa County, but the housing stock and lot sizes shape what is actually possible in each kitchen.
Permits & review
Kitchen remodels in Tempe that involve moving walls, relocating plumbing, or adding electrical circuits require permits through the City of Tempe Development Services. Pulling permits is not optional and skipping them creates problems at resale. We handle permit applications and schedule inspections as part of every project.
Housing stock
A large share of Tempe's single-family homes were built between the 1950s and 1980s. Kitchens in that era were closed off from living areas, had minimal cabinet depth, and used materials well past their useful life. Opening a wall, updating electrical to current code, and reconfiguring the layout are common scopes on these homes.
Areas we serve
We serve Tempe and surrounding communities throughout the East Valley and central Valley. Projects in Tempe often sit close to Scottsdale, Mesa, Chandler, and Phoenix, and we work across all of those cities regularly.
Common questions
What is the typical cost of remodeling a kitchen in Arizona?
For most Tempe homes, a kitchen remodel runs somewhere between $25,000 and $75,000 depending on scope. A straightforward update, new cabinets, countertops, appliances, and a backsplash without moving walls or plumbing, typically lands in the $25,000 to $45,000 range. If you are reconfiguring the layout, adding an island, or relocating a sink or range, plan for $45,000 to $75,000 or more. Custom cabinetry and stone countertops are the two biggest cost drivers in this market.
What is a realistic budget for a kitchen remodel?
A realistic budget depends on what you actually want to change. For a mid-range Tempe kitchen, most homeowners spend $35,000 to $55,000 and end up with solid semi-custom cabinets, quartz countertops, a tile backsplash, new flooring, and updated lighting. That number assumes permits, demo, and installation are included, which they should be. The mistake most people make is budgeting only for materials and getting surprised by labor and permit costs later.
Is $10,000 enough for a kitchen remodel?
Honestly, not for a full remodel. At $10,000 in the Tempe area, you can realistically do one of these things: repaint cabinets and replace hardware, swap out countertops on a small kitchen, or install new appliances. You cannot do all of them at full quality and come in under $10,000 with licensed labor and proper permits. If your budget is $10,000, we will tell you what is actually achievable instead of overpromising.
Is $30,000 enough for a kitchen remodel?
Yes, $30,000 can get you a solid kitchen remodel in Tempe if the scope is focused. That budget works well for replacing cabinets with stock or semi-custom boxes, installing quartz or granite countertops, adding a new backsplash, and updating fixtures and hardware. It gets tight if you need to move plumbing, add an island, or change the electrical panel. We can walk you through exactly what fits your layout and your $30,000 before you commit to anything.
How long does a kitchen remodel take in Tempe?
A standard kitchen remodel in Tempe runs four to eight weeks from demo to final inspection. Cabinet lead times are usually the longest variable, two to six weeks depending on whether you choose stock, semi-custom, or custom. Permit processing through the City of Tempe adds time if it is not planned for upfront. We pull permits on every job and build that timeline into the schedule from day one.
Do I need a permit for a kitchen remodel in Tempe?
Yes, in most cases. If you are moving or adding electrical circuits, relocating plumbing, or making structural changes like removing a wall, the City of Tempe requires permits. Cosmetic work like replacing cabinets in the same footprint or swapping countertops typically does not. A contractor who skips permits to save time is putting your home sale and your homeowner's insurance at risk. We handle permitting on every project that requires it.
How do I choose the right kitchen remodeling contractor in Tempe?
Look for a contractor who is licensed with the Arizona Registrar of Contractors, carries liability and workers comp insurance, and gives you a written contract with a fixed scope and payment schedule. Ask specifically who is doing the work, the company's own crew or subs you have never met. Get at least two bids and compare them line by line, not just the total. If a bid is significantly lower than others, ask what is missing. Most surprises on kitchen jobs come from vague contracts, not bad luck.
Keep exploring
Other services in Tempe
Bathroom Remodeling→Home Renovation→Home Addition→Adu→Home Builder→
Planning your remodel?
Bayside gives free, itemized estimates with no pressure to sign.